PDA

View Full Version : 1995 GS300 -> Aristo 2JZ-GTE (MKIII Supra injectors)



jtamulis
26th-May-2010, 06:11 PM
Ok, so I hooked up my 1995 GS300 with a new motor. (out of a 1995 Toyota Aristo JDM 2JZ-GTE)

MKIII 440cc low impedance resistance injectors instead of the stock 440cc high impedance. (I used a resistor pack).

Loaded up the MKIV Supra JDM Map, ditched the Stock MAP sensor, set the idle and full throttle settings, and bumped the key.

Perfectly clean start in 2 seconds, to a 1200rpm idle, dropping to a perfect 850 idle 15 seconds later. Everything worked perfectly the first time. Now I can START putting the darned car back together 8-). It's only been a friggin year since I started this project.

notes for (people who may be searching for these info):
1995 Aristo JDM ECU, MKIII Supra 440cc low impedance injectors (with installed resistor pack), ditched stock MAP sensor, used stock Air intake Temp Sensor.

Jeff

1dwayne2
20th-February-2012, 01:27 PM
Hey whats up,where u got ur startup map from?I have a similar setup.

MAP-ECU Man
20th-February-2012, 09:07 PM
Jeff is referring to the 2JZ-GTE JDM base table on the website and supplied on the MAP-ECU CDROM.