PDA

View Full Version : MAP ECU version ?



Suprasam
19th-December-2008, 01:34 PM
Iam unsure which model of MAP ECU i have bought ? how can i check it and if its a verion 1 i need some kind of way to upgrade it to the newer releses ?

Thanx in advance

MAP-ECU Man
19th-December-2008, 06:16 PM
There is no real way to check from the outside, but we can usually tell from the serial number. Please provide the serial number and we can let you know.

There are only 2 versions of firmware, the early V2.1 version which was only used on the very early units, and the firmware that works on V2.2 and V2.3.

Suprasam
21st-December-2008, 03:25 PM
Ok where is the serienumber printed there is a white paper label but only the three last digit can be read and they are 633.

thanx in advance


There is no real way to check from the outside, but we can usually tell from the serial number. Please provide the serial number and we can let you know.

There are only 2 versions of firmware, the early V2.1 version which was only used on the very early units, and the firmware that works on V2.2 and V2.3.

MAP-ECU Man
21st-December-2008, 11:25 PM
We assume it is something like 10633 which will be the latest firmware. Use V2.3 or V2.2 of MAP-CAL.

BTW, there is another serial number on the PCB inside the unit. If you undo the 4 screws on the side with the serial connector the PCB will slide out of the case.

Suprasam
22nd-December-2008, 11:17 AM
Will do many thanx for the fast and good answers on this :-) much appricated.

Suprasam
25th-December-2008, 12:01 PM
I took a look inside and it was infact serialnr:10633 :-) so then its cool :-).
Many thanx.



We assume it is something like 10633 which will be the latest firmware. Use V2.3 or V2.2 of MAP-CAL.

BTW, there is another serial number on the PCB inside the unit. If you undo the 4 screws on the side with the serial connector the PCB will slide out of the case.

sccoupe
7th-August-2009, 12:06 AM
I have serial 10032 and need a mapcal version that will work with it. I have tried 2.2 and 2.3 and they say incompatible mapecu.

Thanks

MAP-ECU Man
7th-August-2009, 09:05 AM
We emailed you a copy of V2.1.1.7. If you have not received it please check your spam folder.

MAP-ECU Man
30th-May-2010, 10:28 AM
Please you other post: http://www.performancemotorresearch.co.nz/forum/showthread.php?t=571