Search:

Type: Posts; User: Denrée

Search: Search took 0.00 seconds.

  1. Maybe low +12V... Ground MAP-ECU is connect to...

    Maybe low +12V... Ground MAP-ECU is connect to OEM ECU ground
  2. It´s ignition problem when engine is cold... I...

    It´s ignition problem when engine is cold...

    I test your option, no result.... Same problem
  3. good evening The engine still does not start...

    good evening

    The engine still does not start cold, and I do not know what to do ....

    Please help me
  4. The engine even when trouble started. Do you...

    The engine even when trouble started.

    Do you have an option in MapCal for easier starting?
  5. OK I recharged my battery, selected the...

    OK I recharged my battery, selected the "Elimination" mode.

    Finally, the engine starts.

    No I have not installed the resistance of 220 ohm.

    I have a question, if i don't touches the timing...
  6. That screen shot of MAPECU Configuration looks...

    That screen shot of MAPECU Configuration looks correct with MAF Elimination selected. --> Currently I am in mode "MAF MAP Y-axis intercept"


    Does the power led closest to the 3-way connector...
  7. OK the engine starts only "MAF MAP Y-axis...

    OK the engine starts only "MAF MAP Y-axis intercept" mode

    In "MAF Elimiation", the engine does not want to start.


    I have no MAF plugged in, so why should it choose "MAF MAP Y-axis...
  8. 929 What are the 220 ​​ohm resistors in the...

    929

    What are the 220 ​​ohm resistors in the diagram and connect them guilty?
  9. No ignition after installing MAP ECU V3 on my RB25DET

    Hello

    I pulled MAP ECU V1 to install a MAP V3 ECU.

    But since the connections, the engine does not start ...

    I have no spark at the spark plugs.

    Yet I have followed the diagram for...
  10. Ok thank you

    Ok thank you
  11. Use oem knock sensor RB engine whith MAP-ECU V3

    Hello

    I buy the last MAP-ECU V3 to replace my V1.

    I can use the two oem knock sensor of my RB25DET with MAP-ECU V3 ?

    This solution is reliable?

    Thank you and sorry for my bad english (i...
  12. Thread: Maps RB25DET

    by Denrée
    Replies
    9
    Views
    3,264

    OK great, thank you very much! I would give...

    OK great, thank you very much!

    I would give you news when I could buy the MAP-ECU V3
  13. Thread: Maps RB25DET

    by Denrée
    Replies
    9
    Views
    3,264

    Hello I think buying a map-ecu V3 to replace...

    Hello

    I think buying a map-ecu V3 to replace my actual V1.

    Is that I can use the 16-pin connection V1 on V3? It is bolt-on?

    Is that the mapping V1 is compatible with V3 mapcal ?

    Thank you
  14. Thread: Maps RB25DET

    by Denrée
    Replies
    9
    Views
    3,264

    Hello, That since I installed my MAP ECU V1 on...

    Hello,

    That since I installed my MAP ECU V1 on my RB25DET, the car starts perfectly cold. But once hot, it has some problems to start. You have to try several times for it to start quickly.

    I...
  15. Thread: Maps RB25DET

    by Denrée
    Replies
    9
    Views
    3,264

    846 installation ok ...

    846

    installation ok


    http://www.youtube.com/watch?v=M8mk0WvntsQ
  16. Thread: Maps RB25DET

    by Denrée
    Replies
    9
    Views
    3,264

    Hello Today, I finally found and purchased a...

    Hello

    Today, I finally found and purchased a V1 Mapecu!

    I'm glad because mapecu is new: D

    These are the first pictures:
    842

    843
  17. Thread: Maps RB25DET

    by Denrée
    Replies
    9
    Views
    3,264

    Maps RB25DET [HELP for hot start]

    Hello, I'm French.

    I would buy a MAp ECU V1, so I want a "fuelmap" engine RB25DET R33GTST

    I will install a turbo T67-25G and larger injectors (550cc or more)

    Thank you for your help!
    ...
Results 1 to 17 of 18