Results 1 to 4 of 4

Thread: Auto learn temp sensor wiring?

  1. Default Auto learn temp sensor wiring?

    I have mapecu wired to a jzx100 engine, I have zeroed out the table, and it is writing to the table. My question is does the mapecu need to build the table with the mapecu proprietary temperature sensor or should I wire it in when I remove the MAF? Thanks in advance, have a great day today!

  2. #2

    Default

    Sorry about the delay responding. The IAT sensor is ignored in learn mode. Just checking why you are using learn mode? We don’t actually use it anymore with the number if base tables we now have. Btw, the original red MAPECU does not have a IAT input either.
    Last edited by MAP-ECU Man; 20th-April-2019 at 07:19 PM.
    MAP-ECU Support

  3. Default

    that's what i figured, I wired it to the E2 and IAT pins of the MAF connector. It's up and running MAF delete.

  4. #4

    Default

    Excellent, please let us know your results.
    MAP-ECU Support

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •