Results 1 to 2 of 2

Thread: Can't read afr log

  1. Default Can't read afr log

    I have AEM 30-4100 wired and reading accurately on a 1jzgte but I cant read the log if I zoom in there is nothing. The wideband is wired to the orange MAF wire and the factory narow band o2 is wired to the yellow o2 in wire. The use MAF voltage input for o2 input box is checked. Thanks in advance.

  2. #2

    Default

    It sounds like you have configured the inputs correctly. Have you selected the wideband you have under MAPCAL Configuration?
    MAP-ECU Support

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •